
MG57 - MG Wire Harness Removal
I've chickened out and have decided not to do my own welding, So I'm just cleaning it up a bit and I'm gonna haul it down to my brother's place so he can weld it for me.
35 posts

I've chickened out and have decided not to do my own welding, So I'm just cleaning it up a bit and I'm gonna haul it down to my brother's place so he can weld it for me.

A response to a youtube video I recieved regarding some body damage and door gap issues

I found this kind of interesting, tonight I stumbled across this video on youtube. An old episode of Top Gear circa 1990 that highlight the MGB family of cars.

In this episode I go over the various parts and pieces that make up the MGB's sills and rocker panels

It's been a while since I worked on the MG B so I thought I'd do a little recap and bring everyone back up to speed.
A few days ago I pulled the trigger on an order from Moss Moss for all of my sill replacement pieces and half sections of my rear quarter panels. I'm pretty excited to get back on it.

I clean the MG's rear differential up and throw in some new gear oil.

I paint up the MG B's front cross member and disassemble the steering rack.

Previously I had cleaned up the MG Bs front shock absorbers, you can see that <a href="http://bit.ly/rdp6K">here</a>. Now I move on to the rears and clean them up, drain and refill the oil in them.

My brother Kevin's friend Travis has a very serious car restoration hobby and was kind enough to let us use his sandblasting booth to clean up some of the MG B's parts.

In this episode I undercoat the wheel wells of the MG B with some rubberized undercoating.

Still working on the MG's front suspension and steering. I pull apart the calipers and kingpins, but had to stop short since I was missing a socket big enough to remove the wheel bearings.

Trying to keep the project rolling forward, I'm just cleaning up and painting some more of the suspension

So I've got some time to think about things, I alluded to it previously but I'd really like make my own dash.

In this episode I take apart the MG's shocks, give them a good cleaning, some new oil and a paint job.

My dad norm helps me pull off the sway bar and tie rods on the MG B's front crossmember

The teardown is now all but complete. This week I pull off all the wheels and suspension.

In this weeks episode I use a trick I learned on the mgexperience.net forums to remove my windshield wiper assembly and I also removed the brake and gas lines underneath the car.

This week I continue with stripping the parts off the MG B. I talk briefly about the braking system and how the wiring harness runs throughout the car. How I removed the bonnet/hood release, hood/convertible top snap and the heater vent.

This week on Marty's Garage I head up to visit Brian McCullough of BMC British Automobile. Brian shows us some of the projects he's working on at the moment. You can find out more about BMC @ http://www.bmcautos.com

My buddy Josh swing buy and helps me start to tear apart the MG's 1800 inline 4 cylinder engine.

It's been a big build up to this moment, but it's finally time to get that engine out of the MG, My dad and my brother stop by and lend a helping hand as well.

In this Episode it's just me yacking about going to the MN MG Group

In this episode I explain the workings of an alternator and do a little bit of prep work on the engine.

This week I remove the alternator and a couple random pieces from the MG

This week on Marty's Garage I go back in time a little bit and show you how to remove the seats from an MG B. I also show you what I did to fix mine up a bit.

With the gas tank off I figure it's a good time to swap out my other leaf spring.

This week on Marty's Garage involves Gas Fumes, Sparks, And my friend stiffler. Other then that I'm starting to receive a lot of pointers on how to make the show better and some kind words of encouragement. Keep it coming!

This week on Marty's Garage the dashboard gets removed.

My Brother Kevin stops by and helps me get a ton of stuff done. The windshield, doors and fender get removed

My dad stopped by in this episode with a little surprise for me. A new old furnace! Norm and I install the furnace and I take advantage of my new warm garage!

In this episode I explain how to remove the heater unit from my 1973 MG B.

Starting to pull things apart, removed a few things from the engine compartment and found a bunch of rust hiding under some of the chrome.

Not much going on here just talking a little bit about what my plans are.

Follow me on my journey restoring a 1973 MG B that has been off the road for close to 14 years. I'm a little nervous on this first episode so bear with me:) More to come...