
Honda Element Hitch Receiver Install
I picket up a class II Hidden Hitch receiver (Part 87506) for my element for extra moped hauling functionality. Here's a video on how to install one of these things.
70 posts

I picket up a class II Hidden Hitch receiver (Part 87506) for my element for extra moped hauling functionality. Here's a video on how to install one of these things.

I've chickened out and have decided not to do my own welding, So I'm just cleaning it up a bit and I'm gonna haul it down to my brother's place so he can weld it for me.

I stop by my friend Matt's house and we replaced the steering dampener on his 1996 Dodge Ram.

A response to a youtube video I recieved regarding some body damage and door gap issues

I found this kind of interesting, tonight I stumbled across this video on youtube. An old episode of Top Gear circa 1990 that highlight the MGB family of cars.

In this episode I go over the various parts and pieces that make up the MGB's sills and rocker panels

I stopped by my friend Matt's house last night and we replaced his front shock absorbers on his Dodge Ram Pickup. The actual procedure is fairly simple but we ran into some trouble due to rust.

I unfortunately threw my back out a few days ago so no new progress on the MG, but I did replace the thermostat in my Volvo over Easter so I figured I'd throw this video up now. I was getting a check engine light and…

It's been a while since I worked on the MG B so I thought I'd do a little recap and bring everyone back up to speed.
A few days ago I pulled the trigger on an order from Moss Moss for all of my sill replacement pieces and half sections of my rear quarter panels. I'm pretty excited to get back on it.

Since I was getting a whole lot of use from the stereo I put in the MG I decided to throw it into my wife's 1998 Jeep Grand Cherokee. In video I give step by step instructions on how it was done.

Alfa Romeo's unpronounceable new concept car has stolen my heart! I sure hope this ends up in America some day.

In this episode I replace an auction sensor on my 2001 Volvo S40. I discovered the problem when I started getting a check engine light, I pulled the codes with an OBD-II reader and the code it found was P0130 after some googling that pointed me in the direction of the oxygen sensor.
Hmm I dropped my video last night and it appears that there's no sound post-encoding. I'll repload it again tonight so don't waste you time with the current one

it's recommend that the timing belt is replaced ever 100k miles, well right now I'm over 120k and I'm nervouse to say the least. My dad was kind enough to help me out(did most of the work) and we got it done.
Here's a list of codes I found on volvoforums.org.uk, thought I'd post them here for easy access.

It really got me thinking how much everything is changing right now in the auto industry. Toyota it seems is really letting quality fall to the wayside. I really don't think you can just say "The Japanese make the best cars" nowadays and just take it at that. Everything really seems to be in a state of flux at the moment.(who woulda thunkit?) I really feel that American manufacturers are starting to build better cars finally,

Matt's rims were looking pretty bad on his Malibu so we repainted them.

In this episode I dump 1/3 of a can of seafoam into my engine via a vacuum line in order to remove excessive carbon that may have built up over time.


I respond to an email about some possible ignition trouble and talk about what do do when you get a check engine light.

I visit my brother Kevin at his friend Doug's place where he's swapping the frame on his freightliner trucks for sale.

I clean the MG's rear differential up and throw in some new gear oil.

BMW has some videos out showing off their design for their diesel/electric hybrid.

My brother Kevin picked up a repairable 2003 Chevy Silverado SS and I swung by his place to get some video of it before he got to work on it.

I paint up the MG B's front cross member and disassemble the steering rack.

I just finished watching these video over on youtube, it's interesting how much has changed and how much is still kind of the same when it comes to building cars.

Previously I had cleaned up the MG Bs front shock absorbers, you can see that <a href="http://bit.ly/rdp6K">here</a>. Now I move on to the rears and clean them up, drain and refill the oil in them.
My daily driver is a Volvo s40, I've had it for close to 5 years now and I have to say It's been a sold machine. I really haven't had to do anything to it, it just runs. Well as a result it doesn't get a whole lot of attention from me.

But moving on since the whole idea is to get these cars that receive poor gas mileage off the streets permanently, the stipulation is that they need to be disabled/destroyed. I saw this on Jalopnik the other day.

My brother Kevin's friend Travis has a very serious car restoration hobby and was kind enough to let us use his sandblasting booth to clean up some of the MG B's parts.

In this episode I undercoat the wheel wells of the MG B with some rubberized undercoating.

Wow and I thought I was a stickler when it comes to cleaning my cars.

Still working on the MG's front suspension and steering. I pull apart the calipers and kingpins, but had to stop short since I was missing a socket big enough to remove the wheel bearings.

At the launch of the Fiat 500C last week, designer Roberto Giolito confirmed that Italy's de facto national automobile will make its American debut in early 2011. As expected, the 500 will be built by the company's new American partner, Chrysler, though it's not entirely clear where vehicles will be manufactured. Factories in the U.S. and Toluca, Mexico are the most likely choices.

Trying to keep the project rolling forward, I'm just cleaning up and painting some more of the suspension

When we first bought the 1998 Jeep Grand Cherokee I bought a set of new spark plugs and plug wires to throw into it. It didn't necessarily need them, but being a used vehicle you never know when they were done last. Follow along as…

So I've got some time to think about things, I alluded to it previously but I'd really like make my own dash.

In this episode I take apart the MG's shocks, give them a good cleaning, some new oil and a paint job.

My dad norm helps me pull off the sway bar and tie rods on the MG B's front crossmember
About a month ago I mentioned that my brother Kevin was purchasing a salvage title Silverado SS. Well the project is underway and it'll be a little bit before I get some videos of the work up, but I did snap some pictures off and I threw a little slide show together.
Wow this camaro leaves me absolutely speechless, this guy is dreaming if he ever thinks he'll get $45k for it. Horrible, just horrible....

My dad Norm and my two younger and far less handsome brothers head down to the minneapolis car show with a singular task.

The teardown is now all but complete. This week I pull off all the wheels and suspension.
When I first saw the Fiat 500 I thought damn that's a cool looking car too bad we probably won't be seeing them here in the US. Well it looks like there's one thing good that's coming out of this global economic meltdown. Sounds like…

In this weeks episode I use a trick I learned on the mgexperience.net forums to remove my windshield wiper assembly and I also removed the brake and gas lines underneath the car.

This week Kevin and I finish up with the restoration of the Jeep Grand Cherokee.
I just put up a picasa web album of the pics I took while restoring the Jeep. Check it out if you're interested...

This week I took the jeep down to my brother Kevin's workplace and he pulls our a pretty big dent out of the rear passenger quarter panel

I get to work on fixing some of body damage and take a trip to the junkyard to scavenge for some cheap parts

Something I like to do to all of my vehicles when I first get them, an oil change and an air filter.

We decided it would be best to get rid of the Saab and maybe buy a fixer upper of some sort. Well we found one a 1998 Jeep Grand Cherokee that's been in a fender bender or three....

This week I took a break from working on the MG to deal with some problems we started having with my wife's car. We had the car towed over to our favorite Saab mechanic Bernie Fedie @ Fedie Fixes Foreigns to have him take a…

This week I continue with stripping the parts off the MG B. I talk briefly about the braking system and how the wiring harness runs throughout the car. How I removed the bonnet/hood release, hood/convertible top snap and the heater vent.

This week on Marty's Garage I head up to visit Brian McCullough of BMC British Automobile. Brian shows us some of the projects he's working on at the moment. You can find out more about BMC @ http://www.bmcautos.com

My buddy Josh swing buy and helps me start to tear apart the MG's 1800 inline 4 cylinder engine.

It's been a big build up to this moment, but it's finally time to get that engine out of the MG, My dad and my brother stop by and lend a helping hand as well.

In this Episode it's just me yacking about going to the MN MG Group

In this episode I explain the workings of an alternator and do a little bit of prep work on the engine.

This week I remove the alternator and a couple random pieces from the MG

This week on Marty's Garage I go back in time a little bit and show you how to remove the seats from an MG B. I also show you what I did to fix mine up a bit.

With the gas tank off I figure it's a good time to swap out my other leaf spring.

This week on Marty's Garage involves Gas Fumes, Sparks, And my friend stiffler. Other then that I'm starting to receive a lot of pointers on how to make the show better and some kind words of encouragement. Keep it coming!

This week on Marty's Garage the dashboard gets removed.

My Brother Kevin stops by and helps me get a ton of stuff done. The windshield, doors and fender get removed

My dad stopped by in this episode with a little surprise for me. A new old furnace! Norm and I install the furnace and I take advantage of my new warm garage!

In this episode I explain how to remove the heater unit from my 1973 MG B.

Starting to pull things apart, removed a few things from the engine compartment and found a bunch of rust hiding under some of the chrome.

Not much going on here just talking a little bit about what my plans are.

Follow me on my journey restoring a 1973 MG B that has been off the road for close to 14 years. I'm a little nervous on this first episode so bear with me:) More to come...